Common Problems And Adjustment Methods Of Peanut Machine Cleaning System

clear

selected

room

unit

Pieces

1. Vibrating screen is blocked

Stop

3. Low crop moisture content and high roller gear position;

4. The speed of the cleaning fan is not enough and the belt is slipping;

5. Blocking of the thrower affects the low speed of the cleaning fan;

6. The vibrating screen is blocked by debris;

7. The grass cutter is blocked;

8. The drive shaft bearing is damaged.

3. Lower the gear of the roller gearbox;

4. Tighten the V-belt of cleaning fan;

5. Clean up items blocked by the ejector;

6. Clean up debris;

7. Clean up the chopper debris;

8. Replace with new bearings.

2. Fruit box peanuts

Fruit impurity rate

high

1. Low crop moisture content and high roller gear;

2. The speed of the cleaning fan is not enough, and the belt is slipping;

3. The thrower is blocked, which affects the low speed of the cleaning fan;

4. The grass cutter is blocked;

5. The sieve is deformed by foreign matter.

1. Lower the gear of the roller gearbox;

2. Tighten the V-belt of cleaning fan;

3. Clean up the thrower items;

4. Clean up the chopper debris;

5. Perform repairs.

3. Miscellaneous stirring dragon

Blockage

1. Low crop moisture content and high roller gear;

2. The sieve is deformed by foreign matter;

3. The speed of the cleaning fan is not enough, and the belt is slipping;

4. There is rain on crops;

5. The auger shaft bearing is damaged.

1. Lower the gear of the roller gearbox;

2. Repair;

3. Tighten the V-belt of cleaning fan;

4. Stop operation and continue drying;

5. Replace with new bearings.

Miscellaneous promotion

Clogged

1. Lift the conveyor belt to slip;

2. There are too many sundries in the surplus stirring dragon;

3. The conveyor belt runs off and rubs the side wall;

4. Miscellaneous auger shaft to drum gearbox V-belt slips;

5. The driving shaft or the driven shaft bearing is damaged.

1. Adjust the left and right adjustment rods on the upper part of the lifter to tighten the conveyor belt;

2. Check the tension of the triangle belt of the cleaning fan;

3. Adjust the tension consistency of the conveyor tension roller;

4. Adjust the V-belt tensioning wheel to increase the tension;

5. Replace with new bearings.

Thrower flower

Fruit jam

1. The fruit is not unloaded in time after the box is full;

2. Suddenly stop running during operation;

3. The ejector is not completely cleaned after being blocked;

4. The observation port cover of the ejector is not closed;

5. The inlet of the throwing fan is blocked by debris;

6. Cleaning the V-belt of the fan to slip;

7. The bearing of the fruit mixing dragon is damaged.

1. Monitor and unload fruits in time;

2. It is required to stop the forward operation, and it must be operated at rated speed for 12 minutes before reducing the throttle;

3. It must be cleaned up thoroughly before it can be restarted;

4. Repair and tighten the bolts firmly;

5. Clean up debris;

6. Adjust the V-belt tensioning wheel and tighten the V-belt;

7. Replace with new bearings.