The driver must have field experience and training through harvester operations. It is strictly forbidden to engage the power block before starting the unit. When the unit starts, engages the power block, turns, and reverses the horn, observe whether there are any people before and after the unit, and do safe operation.
During the work, the driver should concentrate on observing and listening to the operation of the various parts of the machine. The throttle is controlled according to the load. If abnormal sound or malfunction occurs in the machine, the power block should be released in time to eliminate the malfunction to avoid damage to the machine.
When working, once the grain outlet is found to be clogged, you can't use sticks, and you can't reach into the food outlet to eliminate the fault, prevent the leaves from damaging the fingers, and stop immediately to clean up.
During the operation, the cutter was found to have deposits, which could not be cleaned with sticks to prevent damage to the cutter, and could not be cleaned by hand, so as to avoid personal injury and death. When the work is unloaded, it cannot be fed by hand. It should be fed with soft objects.
It is strictly forbidden to engage the power block while the machine is moving or when troubleshooting. The unit should be disconnected from the power block during long-distance transport or no-load operation.
When inspecting the machine, the tools such as wrenches and hammers should be inspected in time, so be careful not to leave them in the machine to prevent injury to the machine when starting the machine, so as to prevent it from happening.
