1. It is necessary to adjust and overhaul the peanut harvester before use. Before the operation, the operator should check all the fruit pickers to see if the picking machine is in the absence condition, whether the bolts of the components are fastened, whether the pulley devices are strong, and whether the pulleys are changed by hand or not. Picking up some hobbing teeth with or without open welding and missing teeth; changing the hob shaft by hand to investigate whether the transition is stable; seeing whether the triangular belt tension of each transmission part is reasonable; seeing whether the diesel engine working condition is outstanding; Is the operation normal, and the power cord has no leakage appearance. In addition, each conversion component should be equipped with a protective cover; during the test operation, the operator should first leave the fruit picker and wait for the operator to announce the rule signal before starting the test operation.
2. The operation should be carried out according to the process flow. When feeding peanuts, it is necessary to fill the peanuts into the feeding port first, and the feeding should be uniform; it is forbidden to feed solid objects such as stones, wooden blocks and metal objects into the machine during operation to avoid damage to the machine and shape* ** Body accidents; it is forbidden to reach into the feeding port, fan mouth, and dorms during operation; the operator should tighten the cuffs when working, and the lesbians should bring the working caps; if they hear abnormal sounds or find them during operation When it is wrong, it is necessary to stop the inspection, promptly eliminate the problem, prohibit the operation of the machine; prohibit the fruit picker from overloading; after the operation is completed, there must be professionals to view, adjust and protect. Such as: adding grease, repair welding, etc.; when the fruit picker shows that the drum is blocked, you should check the feeding amount, the peanut dryness, the tightness of the motor triangle, the power supply voltage, etc.; the peanut harvester should be adjusted when it is not cleaned. The gap between the hobbing and the bottom of the screen. When the gap between the hobbing and the bottom of the sieve is large, it is easy to form the unclean; when the peanut fruit contains many impurities, and the peanut fruit is sucked out, the suction port should be properly adjusted. When the sundries are sucked out, the suction port is raised.
