6. Adopt automatic high-level unloading grain tank, which is suitable for different grain transportation vehicles, labor-saving and quickly unloading.
The front and rear positions are to ensure that when the cutter cuts the stem of the crop, the elastic teeth are capable of supporting the straw and pushing the elastic teeth backwards to the working object.
Under normal circumstances, when the reel is at the lowest position, the front and rear positions should ensure that the gap between the spring teeth and the cutter and the auger is greater than 20 mm.
1. The cutter can not be used for sick operation, and should be checked and adjusted frequently when using it;
2. The clearance between all moving blades and Type II blade should be no more than 0.5 mm, but it should not be pressed too tight to prevent friction from overheating;
3. Where possible, it is advisable to increase the cuttings as much as possible;
4. When adjusting, running in and storing for a long time, the friction and sliding parts of the cutter should be buttered.
Q1. How long is the delivery date for small grain combine harvester ?
A: In general, we can ship the small grain combine harvester within 15 days after receiving your payment. Of course, it also depends on your quantity.
Q2: What is your terms of payment for small grain combine harvester ?
A: T/T, L/C, Paypal,Western Union
Q3: How is the quality of the small grain combine harvester ??
A: We are an experienced manufacturer which has been in this field for 30 more years, and can supply high quality harvesters for you.